Automatic Ignition Device
Product Description
- automatic ignition device is made up of: burner, shell, high voltage wire, insulating support, high pressure generator, flow control switch, thermocouple, operation box, inlet, condensate outlet and wind rope.
- flare system parameter:
- 1) designed capacity：5-450 Nm3/h;
- 2) component: natural gas
- utility: power supply AC220V 50±2.5HZ 1KW
- This device can be connected to software of intelligent multi-phase measuring separation system, enable it to be automatically and manually started.
Features
- Thermostability alloy steel (310S/304) is used for component, which is working under high temperature, which enable the device to reliably work under high temperature and resistance to corrosion from acid and sulfur.
- Adopting Jacob's ladder discharge principle and equipped with circular moving surface discharge electrodes, the electrode has a long lifespan, high energy discharge, and is resisting to pollution such as carbon and snow accumulation.
- The electrical insulation components are made of quartz glass, a material which is burned to 1100 ℃ and put into cold water several times but there are no cracks and damages. It can work for a long time at a temperature of 1200 ℃.
- The high-temperature area close to the torch burner uses fire-resistant wires to supply power to the igniter, which can withstand harsh working conditions such as high temperatures above 800 ℃ and fire rain that may occur in the upper part of the torch. It has strong resistance to wind and snow and is safe and reliable.
- The ignition electrode is made of a special material (3YC52) which is resistant to high temperature and electrical corrosion. The cyclic surface discharge method enable it has high discharge energy, strong self-cleaning ability and there is no electrical corrosion phenomenon. The lifespan of the ignition electrode exceeds 200000 times.
- Intelligent detection of gas flow, automatic ignition can be achieved when the ignition conditions are met, the device can be remotely controlled through APP and PC.
Intelligent Cooling Device for Drilling Mud
- Excessive drilling fluid temperature not only affects its own performance, but also affects the environmental temperature, service life, mechanical drilling speed and sidewall stability of drilling tools and directional testing tools. It is necessary to cool the drilling fluid in a timely manner during drilling operations to reach a suitable temperature.
Performance characteristics
- PRIHUATI’s cooling device for drilling mud is composed of four large air-cooling devices, superconducting device, rapid heat exchange device, a 35KW slurry pump, and explosion-proof electrical control system, with a designed processing capacity of 150m ³/ H (or set according to customer needs).
- This device is mainly designed for deep and complicated wells and is an effective solution for rapid cooling of drilling fluid. It can achieve effective cooling of drilling mud at high temperature and pressure of 40-60 degrees Celsius.